What Is The Standard Size Of A Backboard

From Cricket Betting
Jump to navigation Jump to search

As the game developed in the late 19th and early 20th centuries, different parts of England came up with their own versions of the game, featuring Irish Black, Ipswich 5’s, Old Style London, London (Clock), Lincoln and Yorkshire dart arachnid boards.

Measure on the floor, from the wall, 7 feet 9 1/4 inches (2.36 m) plus round the c darts lens’s thickness. Remember that it should be 7 feet 9 1/4 inches from where the bar touches the ground. For greater accuracy, you can attach the plumber’s line to the lens. The standard dartboard measurements are 7 feet 9 1/4 inches (2.36 m) from the board’s front.

Darters generally like to stand on the tape or line, so measure the throwing distance to edge closest to the dartboard.  (In steel-point darts play, this throw line is generally referred to as the Oche’.

Unfortunately, that will not do you much good when you start throwing darts at the regulation dart board. If you repeatedly throw darts at a board that is set up 10 feet away and at some approximate height, your brain and muscles will get trained and sites memorize the perfect position, speed and technique to always score.

As stated earlier, most of the deviations in dartboard setup are attributed to the board itself. However, the only exception to this is the setup for players using a wheelchair. Presently, there are no specific soft board measurements for wheelchair users, so the above wheelchair measurements are applicable for both bristle and electronic dartboard use.

For instance, the soft tip darts community lists their throw distance as 8 feet from the face of an halex electronic dart board game list dartboard. This figure varies a little from that of a traditional bristle dartboard. So, measurements not only change with regards to type of darts and respective dartboards, but with culture as well.

A standard dartboard is also known as a clock board. The bulls-eye consists of the outer bull area and the inner bull area, which scores 50. As the darts originally originated in the United States, all the measurement and design rules are standard in almost every dart.  46 cm) in diameter, and pie-shaped segments look just like a bull’s eye and come in 20 numbers. The dartboard measurements are 18 inches (ca. Each numbered segment is designed with a double ring outside of the perimeter of scoring.

The size of a standard regulation dartboard is 18 inches in diameter and is made up of 20 numbered segments of equal size, which are further segmented into double and treble scoring zones with an inner and outer bull in the centre.